|
|
 |
|
Features |
Part No.: ESD5111, VOLTAGE: 12VDC/24VDC |
Technical parameters
Performance:
Isochronous Operation/Steady State Stability: ± 0.25% or better
Speed Range / Governor: 1K-7.5K Hz continuous
Speed Drift With Temperature (Governor and Speed Switch): ± 1% maximum
Idle Adjust CW: Min, 1200Hz, below set speed
Idle Adjust CW: Min, 4100Hz, below set speed
Droop Range: 1-5% regulation
Droop Adj. Max (H-G and K-L Jumpered)--875Hz., ± 75Hz. Per 1.0A change
Droop Adj. Max (H-G Open, K-L Jumpered)--15Hz., ± 6Hz. Per 1.0A change
Speed Trim Range: ± 200Hz
Remote Variable Speed Range: 500-7.5K Hz, or any part thereof
Terminal Sensitivity
J: 100Hz., ± 15Hz / Volt at 5.0K impedance
L: 735Hz., ± 60Hz / Volt at 65K impedance
N: 148Hz., ± 10Hz / Volt at1 Meg impedance
P: 10VDC Supply at 20ma Max
Environmental:
Ambient Operating Temperature Range: -40° ~85º C
Relative Humidity: Up to 95%
All Surface Finishses: Fungus proof & corrosion resistant
Input Power
Supply: 12 or 24VDC Battery Systems (transient & reverse voltage protected)
Polarlty: Negative ground (Case isolated)
Power Consumption: 50 ma continuous plus actuator current
Maximum Actuator Current at 25º C(77° F): 10 Amps continuous
Speed Sensor Signal: 0.5-120 Volts RMS
Reliability
Vibration: 1G @ 20-100Hz
Testing: 100% Functionally tested
Physical
Weight:545 grams
Mounting: Any position, vertical preferred |
|
|
