The Model 5110 is an Automatic Engine Control Module. The module is used to automatically start and stop the engine,indicating the operational status and fault conditions by means of an LCD display and a flashing LED on the front panel.
Selected operational sequences, timers and alarms can be altered by the user.
Alterations to the system are made using the 55xx configuration software with the 810 interface and a PC. This interface also provides real time diagnostic facilities.
It is also possible to monitor the operation of the system either locally or remotely.
Access to the module is protected by PIN number to prevent unauthorised access.
Micro-processor based design PC or front panel configuration
Automatic engine starting and stopping
Automatic shutdown on fault condition
Custom graphical icon type display
Provides engine and generator instrumentation
Provides engine alarms and status information
Front panel configurable inputs,outputs, alarms and timers.
LED & LCD alarm indication Compatible with 5200 series modules for easy upgrade path.
The 5110 module provides engine and electrical metering facilities via the LCD display with the following instrumentation displays, accessed via the SCROLL push-button:
Generator Volts L1-N, L2-N, L3-N
Generator Volts L1-L2, L2-L3, L3-L1
Generator Amps L1,L2,
Generator Frequency Hz
Engine Speed RPM
Engine Oil Pressure (PSI & Bar)
Engine Temperature (oC & oF)
Plant Battery Volts
Engine Hours Run