SENSING and POWER INPUT
        Voltage    100-264 V ac 1 phase
       Frequency  50-60 Hz nominal
 
OUTPUT
       Voltage   82 V d.c. @ 200 Va.c power input.
       Voltage   45 V d.c. @ 110 Va.c power input.
       Current   continuous 5A (see note 1).
                    transient 7.5A for 10 secs.
       Resistance    15 ohms min
 
REGULATION
       +/- 1.0% (see note 2)
 
THERMAL DRIFT
       0.03% per deg. C change in AVR ambient (see note 3)
 
TYPICAL SYSTEM RESPONSE
       AVR response             20ms
       Field current to 90%    80 ms
       Machine Volts to 97%  300ms
 
EXTERNAL VOLTAGE ADJUSTMENT
       +/-10% with 1 k ohm 1 watt trimmer (see note 4)
       Increasing resistance lowers voltage.
       Fixed 15kOhm resistor enables 110V sensing
 
UNDER FREQUENCY PROTECTION
       Set point 94 -98% Hz (see note 5)
 
UNIT POWER DISSIPATION
       12 watts maximum
 
BUILD UP VOLTAGE
       4 Volts @ AVR terminals
 
     
QUADRATURE DROOP INPUT
       10 ohms burden
       Max. sensitivity: 0.07 A for 5% droop 0PF
       Max. input:  0.33 A
 
OVER EXCITATION PROTECTION
       Set point 67 Vdc +/-3% (fixed)
      Time delay 10-15 seconds (fixed)
 
ENVIRONMENTAL
       Vibration   20-100 Hz 50mm/sec
                     100Hz – 2kHz 3.3g
       Operating temperature    -40 to +70C (note 6)
       Relative Humidity 0-70C   95% (note 7)
       Storage temperature       -55 to +80C